Maybe you want enable dhcpĭisable the old way to configure the network, enable systemd based network configuration, enable systemd generated nf (DNS resolution) and disable mv /etc/network/interfaces systemctl enable systemctl enable systemctl start systemctl disable systemctl enable rvice To get a root, login as user pi and call $ sudo su new file /etc/systemd/network/work Name is not importend, just the suffix/extension network. Login as root and configure a static IP Address. The serial port must be set to ttyS0 not ttyAMA0 on RPI3 at the latest raspbian release. Hint for Raspberry Pi 3 User (Comment from Adrian): It is import to enable the serial device within raspi-config. This is the first shot if you got any errors feel free to report it by a comment.įirst of all install raspbian in the well known way and update to the latest version of firmware and operating $ sudo su apt-get update & apt-get reboot

The script at the end of the post installs knxd with support for EIB/KNX Router with TPUART and for USB EIB/KNX interfaces. This post is based on my previous posts regarding eibd. In my previous posts EIB/KNX Router with an USB Interface and KNX/EIB Router with a TPUART module I described how to use a Raspberry PI as EIB/KNX Router with eibd.Įibd is no longer in development so I decided to give knxd, a fork of eibd, a try:-) The script attached at the end of the post is written for raspbian but should also work an all debian system with systemd imit system.

Raspberry pi fritz box traffic monitor